On orders over $200.00.
Contiguous U.S., Standard Ground Shipping
Victor HC 1200 Series Industrial Cutting Torch

HC 1200 Series Torch

  • For use with any fuel gas, 2 PSIG and above.
  • Universal mixer.
  • Cutting capacity: 18" / 45.7cm.
  • Length: 21" / 52cm to 72" / 183cm.
  • Uses Series 1 cutting tips.
  • Uses "B" 9/16"-18 hose connections.
  • Lock down lever kit available Part Number 0307-0062.

The HC 1200C Series torches are high capacity, heavy duty cutting torches that have a cutting capacity up to 18”. These torches are used in a wide variety of heavy industrial applications that include scrapping and demolition. Straight Torch without Built-in Flashback Arrestors. With Reverse Flow Check Valves. For use with Propane & Pressurized Natural Gas ONLY.

Use add-on flashback arrestors and check valves.


HC1200 Series
Buy Price Part # Model
Number		 Head
Angle		 Hose Conn.
Cutting Oxy.		 Hose Conn.
Pre-heat Gases		 Length
$507.50 0381-1402 HC 1200C 90o "B" 9/18"-18 RH "B" 9/18"-18 LH ( 53cmm )
$507.50 0381-1403 HC 1201C 75o "B" 9/18"-18 RH "B" 9/18"-18 LH ( 53cm )
$540.84 0381-1404 HC 1202C 180o "B" 9/18"-18 RH "B" 9/18"-18 LH ( 53cm )
$635.84 0381-1405 HC 1230C 90o "B" 9/18"-18 RH "B" 9/18"-18 LH ( 915mm )
$635.84 0381-1406 HC 1231C 75o "B" 9/18"-18 RH "B" 9/18"-18 LH ( 915mm )
$699.17 0381-1407 HC 1232C 180o "B" 9/18"-18 RH "B" 9/18"-18 LH ( 915mm )
$1079.17 0381-1408 HC 1250C 90o "B" 9/18"-18 RH "B" 9/18"-18 LH 48"
( 122cm )
$1079.17 0381-1409 HC 1251C 75o "B" 9/18"-18 RH "B" 9/18"-18 LH 48"
( 122cm )
$1143.34 0381-1415 HC 1252C 180o "B" 9/18"-18 RH "B" 9/18"-18 LH 48"
( 122cm )
$1334.17 0381-1412 HC 1270C 90o "B" 9/18"-18 RH "B" 9/18"-18 LH 72"
( 1.82m )
$1334.17 0381-1413 HC 1271C 180o "B" 9/18"-18 RH "B" 9/18"-18 LH 72"
( 1.8m )
$1397.50 0381-1414 HC 1272C 180o "B" 9/18"-18 RH "B" 9/18"-18 LH 72"
( 1.8m )



HC 1200C Cutting Tips
Buy Price Part # Model # Metal Thickness Cutting Oxygen
Pressure		 Oxygen
Pressure		 Fuel
Pressure		 Speed
I.P.M.		 Kerf
Width
In cm PSIG SCFH PSIG* SCFH PSIG SCFH
Acetylene: General Purpose Tips
$18.57 0330-0009 6-1-101 8" 20.3 45/55 500/600   37/55 7/14 34/50 5/6 0.19
$18.57 0330-0013 7-1-101 10" 25.4 45/55 700/850   44/62 10/15 40/56 4/5 0.34
$18.57 0330-0014 8-1-101 12" 30.5 45/55 900/1000   53/68 10/15 48/62 3/5 0.41
Tips for deseaming, scarfing, gouging, weld preparation, removing defective welds, washing rivets.
$38.72 0330-0114 4-1-118     40/50 270/320   20/33 5/10 18/30 9/12 0.12
$74.67 0330-0115 6-1-118     45/55 500/600   37/55 7/14 34/50 6/6 0.19
$76.42 0330-0116 8-1-118     45/55 900/1000   56/68 10/15 48/62 3/5 0.41
Multi-Flame Heating Tips.
$118.34 0330-0527 6-MFTA         10/15 15/44 8/12 14/40    
$120.84 0330-0528 8-MFTA         20/30 33/88 10/15 30/80    
$191.67 0330-0523 10-MFTA         30/40 44/110 12/15 40/100    
$191.67 0330-0524 12-MFTA         50/60 66/165 12/15 60/150    
Natural Gas Propane: General Purpose Tips
$22.14 0333-0308 6-GPN 8" 20.3 55/65 450/500   40/220 8/12 20/100 4/6 0.18
$23.27 0333-0309 7-GPN 10" 25.4 55/65 600/700   40/220 8/12 20/100 3/5 0.34
$23.27 0333-0310 8-GPN 12" 30.5 60/70 750/850   40/220 10/15 20/100 3/4 0.34
Tips for deseaming, scarfing, gouging, weld preparation, removing defective welds, washing rivets.
$38.39 0330-0178 4-1-218     40/50 210/250   23/108 8/12 16/20 8/11 0.12
$101.60 0330-0179 6-1-218     55/65 450/500   23/153 10/15 23/35 4/6 0.18
Tip for coarse splined scrap cutting, using natural gas.
$36.44 0333-0411 8-CSN 12" 30.5 60/70 750/850   50/265 10/14 25/120 3/4 0.41
Tips for mill and foundry scrap cutting under severe conditions, use 0309-0025 tip nut.
$31.39 0309-0025 Tip Nut                    
$70.00 0330-0504 6-HDN 8" 20.3 55/65 450/500   44/240 8/12 22/110 4/6 0.18
$70.00 0330-0505 8-HDN 12" 30.5 60/70 750/850   50/265 10/14 25/120 3/4 0.41
$70.00 0330-0506 10-HDN 14" 35.6 55/65 1000/1200   50/265 10/16 25/120 2/4  
$70.00 0330-0507 12-HDN 16" 40.6 45/45 1150/1350   60/290 12/18 30/130 2/3  
$70.00 0330-0508 14-HDN 18" 45.7 45/45 1300/1500   60/290 12/18 30/130 2/3  
Heavy Preheat tips for scrap, bevel & other.
$23.70 0333-0328 6-HPN 8" 20.3 55/65 450/500   44/240 8/12 22/110 4/6 0.18
$23.70 0333-0330 8-HPN 10" 25.4 60/70 750/850   50/265 10/14 25/120 3/4 0.41
$23.70 0333-0331 10-HPN 12" 30.5 45/55 1000/1200   50/265 10/16 25/120 2/4  
$23.70 0333-0332 12-HPN 14" 35.6 45/55 1150/1350   60/290 12/18 30/130 2/3  
Heavy wall shell for scrap, bevel & other severe conditions.
$27.85 0333-0666 6-HWN 8" 20.3 55/65 450/550   44/240 8/12 22/110 4/6 0.18
$37.97 0333-0668 8-HWN 10" 25.4 60/70 750/850   50/265 10/14 25/120 3/4 0.41
$36.44 0333-0670 10-HWN 12" 30.5 44/55 1000/1200   50/265 10/16 25/120 2/4  
$34.17 0333-0671 12-HWN 14" 35.6 45/55 1150/1350   60/290 12/18 30/130 2/3  
Multi-Flame Heating Tips.
$191.67 0330-0521 10-MFTN         10/30 80/32 12/20 20/80    
$190.00 0330-0522 12-MFTN         30/125 120/640 15/25 30/60    





Flashback Arrestors - For Use With The HC1200 Torches
Cutting Oxygen - Select one of the following.
Buy Price Part # Model Type Tip Sizes Recommended For Use With Each Model
$99.175 0657-0010 FB-O* Torch Mount Up to size #8
$94.17 0657-0014 FB-OR Regulator Mount Up to size #8
$203.34 0657-0076 FBHC-O* High Flow Torch Mount Tip size #10 and larger
$170.00 0657-0078 FBHC-OR High Flow Regulator Mount Tip size #10 and larger
Fuel - Select one of the following.
$19.17 0657-0011 FB-F* Torch Mount  
$99.17 0657-0015 FB-FR Regulator Mount  
*Torch mount models also protect the hose.





Hose Type - For Use With The HC1200 Torches
Oxygen - 3/8" I.D. with "B" hose (9/16"-18 RH) connections. Use grade "T" hose.
Fuel - 3/8" I.D. with "B" hose (9/16"-18 LH) connections. Use grade "T" hose.
Regulators - For Use With The HC1200 Torches
Cutting Oxygen - SR450D-540 or SR 700D-540 Cylinder or L700D/E-500/750 Line Supply.
Fuel - SR461D-510 Cylinder, SR 711B/C/D - 510, L 711B/C/D-500/750 Line Supply.






On orders over $200.00.
Contiguous U.S., Standard Ground Shipping

Last update 27 April 2021

All products subject to availability.
Prices are subject to change.