With Bulldog Torches, superior performance and productivity are assured. The low profile head and lightweight design, strength, and durability put Bulldog in a class by itself.

Straight torch without built in flash back arrestors. With reverse flow check valves. For use with Propane and Pressurized Natural Gas ONLY.



On orders over $200.00.
Contiguous U.S., Standard Ground Shipping


HC1100 Series
Buy Price Part # Model
Number
Lever
Position
Tip Series Head
Angle
Length
$325.00 0381-1703 HC 1100C Bottom Rear 1 90o ( 53cm )
$325.00 0381-1704 HC 1101C Bottom Rear 1 75o ( 53cm )
$450.00 0381-1709 HC 1130C Bottom Rear 1 90o ( 91cm )
$450.00 0381-1710 HC 1131C Bottom Rear 1 75o ( 91cm )
$500.00 0381-1711 HC 1132C Bottom Rear 1 180o ( 91cm )
$582.00 0381-1712 HC 1150C Bottom Rear 1 90o ( 122cm )
$582.00 0381-1713 HC 1151C Bottom Rear 1 75o ( 122cm )
$630.00 0381-1714 HC 1152C Bottom Rear 1 180o ( 122cm )
$785.00 0381-1718 HC 1170C Bottom Rear 1 90o ( 184cm )
$785.00 0381-1719 HC 1171C Bottom Rear 1 75o ( 184cm )
$830.00 0381-1720 HC 1172C Bottom Rear 1 180o ( 184cm )
$450.00 0381-1721 HC 1131C H1 Bottom Rear 1 75o ( 91cm )
$585.00 0381-1722 HC 1151C H1 Bottom Rear 1 75o ( 122cm )
$785.00 0381-1745 HC 1171C H1 Bottom Rear 1 75o ( 184cm )



HC 1100C Cutting Tips
Buy Price Part # Model # Metal Thickness Cutting Oxygen
Pressure
Oxygen
Pressure
Fuel
Pressure
Speed
I.P.M.
Kerf
Width
In cm PSIG SCFH PSIG* SCFH PSIG SCFH
Tip for coarse splined scrap cutting, using natural gas.
$28.57 0333-0411 8-CSN 12" 30.5 60/70 750/850   50/265 10/14 25/120 3/4 0.41
Tips for mill and foundry scrap cutting under severe conditions, use 0309-0025 tip nut.
$18.10 0309-0025 Tip Nut                    
$55.11 0330-0504 6-HDN 8" 20.3 55/65 450/500   44/240 8/12 22/110 4/6 0.18
$55.11 0330-0505 8-HDN 12" 30.5 60/70 750/850   50/265 10/14 25/120 3/4 0.41
$55.11 0330-0506 10-HDN 14" 35.6 55/65 1000/1200   50/265 10/16 25/120 2/4  
$55.11 0330-0507 12-HDN 16" 40.6 45/45 1150/1350   60/290 12/18 30/130 2/3  
$55.11 0330-0508 14-HDN 18" 45.7 45/45 1300/1500   60/290 12/18 30/130 2/3  
Heavy Preheat tips for scrap, bevel & other.
$18.59 0333-0328 6-HPN 8" 20.3 55/65 450/500   44/240 8/12 22/110 4/6 0.18
$18.59 0333-0330 8-HPN 10" 25.4 60/70 750/850   50/265 10/14 25/120 3/4 0.41
$19.75 0333-0331 10-HPN 12" 30.5 45/55 1000/1200   50/265 10/16 25/120 2/4  
$19.75 0333-0332 12-HPN 14" 35.6 45/55 1150/1350   60/290 12/18 30/130 2/3  
Heavy wall shell for scrap, bevel & other severe conditions.
$21.84 0333-0666 6-HWN 8" 20.3 55/65 450/550   44/240 8/12 22/110 4/6 0.18
$29.76 0333-0668 8-HWN 10" 25.4 60/70 750/850   50/265 10/14 25/120 3/4 0.41
$28.60 0333-0670 10-HWN 12" 30.5 44/55 1000/1200   50/265 10/16 25/120 2/4  
$26.80 0333-0671 12-HWN 14" 35.6 45/55 1150/1350   60/290 12/18 30/130 2/3  





Flashback Arrestors - For Use With The HC1100 Torches
Oxygen - Select one of the following.
Buy Price Part # Model Type Tip Sizes Recommended For Use With Each Model
$60.85 0657-0010 FB-O* Torch Mount Up to size #8
$58.15 0657-0014 FB-OR Regulator Mount Up to size #8
$125.34 0657-0076 FBHC-O* High Flow Torch Mount Tip size #10 and larger
$103.18 0657-0078 FBHC-OR High Flow Regulator Mount Tip size #10 and larger
Fuel - Select one of the following.
$60.85 0657-0011 FB-F* Torch Mount  
$58.15 0657-0015 FB-FR Regulator Mount  
*Torch mount models also protect the hose.





Hose Type - For Use With The HC1100 Torches
Oxygen - 3/8" I.D. with "B" hose (9/16"-18 RH) connections. Use grade "T" hose.
Fuel - 3/8" I.D. with "B" hose (9/16"-18 LH) connections. Use grade "T" hose.
Regulators - For Use With The HC1100 Torches
Oxygen - SR450D-540 or SR 700D/E-540 Cylinder or L700D/E-500/750 Line Supply, LC350DR-540 Liquid Cylinder.
Fuel - SR461D-510 Cylinder, SR 711B/C/D - 510, L 711B/C/D-500/750 Line Supply.


Bulldog Cutting Tips

Bulldog Tips by Victor Cutskill offer a cost effective alternative for efficient scrap cutting.

  • For scrap cutting.
  • Heavy wall - two piece design.
  • Resists slag build-up
  • Available in Victor and Harris style




Bulldog Tips by Victor CutSkill - For Use With The HC1100 Torches
Buy Price Style Part # Model # Metal
Thickness
Cutting Oxygen
Pressure
Pre-Heat Oxygen Fuel Pressure
in cm PSIG SCFH PSIG SCFH PSIG SCFH
$12.00 Victor 6700C0710 VBN-3 2.5 6.4 40/50 150/200   23/140 6/12 12/65
$12.00 Victor 6700C0711 VBN-4 3 7.6 40/50 210/250   23/140 6/12 12/65
$12.00 Victor 6700C0712 VBN-5 5 12.7 45/55 300/360   23/140 6/12 12/65
$12.00 Victor 6700C0713 VBN-6 8 20.3 55/65 450/500   23/140 6/12 12/65
$12.00 Victor 6700C0715 VBN-8 10 25.4 60/70 750/850   44/240 10/18 22/110
$12.00 Victor 6700C0716 VBN-10 12 30.5 45/55 1000/1200   44/240 10/18 22/110
$12.00 Victor 6700C0717 VBN-12 14 35.6 60/70 1150/1350   44/240 10/18 22/110
$12.00 Harris 6700C0723 HBN-3 3 7.6 40/50 210/250   23/140 6/12 12/65
$12.00 Harris 6700C0724 HBN-4 5 12.7 45/55 300/360   23/140 6/12 12/65
$12.00 Harris 6700C0725 HBN-5 6.5 16.5 55/65 370/440   23/140 6/12 12/65
$12.00 Harris 6700C0726 HBN-6 8 20.3 60/70 450/500   23/140 6/12 12/65






On orders over $200.00.
Contiguous U.S., Standard Ground Shipping

Last update 11 July 2016

All products subject to availability.
Prices are subject to change.